聯系電話:400-680-8138
                                          首頁 新聞動態 VDA 19中文

                                          VDA 19中文

                                          VDA(德國的汽車工業聯合會)簡介

                                            VDA6.1認證,德國的汽車工業聯合會(VDA:VERBAND DER AUTOBOMIL INDUSTRIE)為整合德國汽車工業的各項標準,于1970年提出的要求。在歐洲,德國的汽車工業聯合會(VDA)在與法國及意大利的汽車工業聯合會(EAQF、AVSQ)協調后,制訂了針對物料產品供應商的VDA6.1“質量體系認證”要求。

                                            德國的汽車工業聯合會(VDA)要求其成員必須的遵循VDA相關的質量管理體系實施和維護的相關的標準。其中VDA 19是關于金屬零部件技術清潔度檢測的部分。

                                          VDA1.9適用范圍和有效性

                                            VDA 19描述了用于零部件顆粒物污染(清潔度檢測)的相關要求以及相應的檢測方法。并在此基礎上對于零件的清潔度做出一個合理的評估。

                                            主要用于:

                                            零部件初步檢驗和評估;

                                            銷售或采購零部件的清潔度相關檢測;

                                            質量控制或與清潔相關的生產過程檢測(如表面處理和裝配過程的清潔度檢測)。

                                            該指南提高了測試結果的信息質量和可比性,它還規定了在汽車行業質量鏈中清潔規格和清潔度測試結果的標準化表達。

                                            相關應用信息:

                                            根據本指南進行技術清潔檢查,本標準引用了下列文件為目錄、規格和報告:

                                            “根據VDA 19.1清潔度檢驗標準”,在供應鏈關系內與客戶沒有沒有其他協議的情況下的標準分析方法。

                                            “根據VDA 19.1的要求進行外部清潔度測試”,在供求關系內更詳細的分析方法已經被定義并且已經記錄在案的情況下,相關的清潔度檢測標準以及相關的分析方法。

                                            “根據VDA 19.1優化檢測時間和方法”在供求關系內清楚的定義檢測方法優化、應用領域、參數。

                                            由于篇幅所限,如需最近VDA 19-2015完整介紹,請致電400-680-8138聯系翁開爾公司。

                                          VDA 19

                                          VDA 19相關檢測儀器

                                          VDA 19清潔度相關檢測儀器

                                          VDA 19清潔度檢測儀

                                          附:VDA1.9英文版本簡介

                                            1 SCOPE OF APPLICATION AND VALIDITY

                                            1.1 Introduction

                                            The guideline describes requirements for applying and documenting methods for determining particulate contamination on functionally-relevant components (cleanliness inspection).

                                            A cleanliness inspection forms the basis of an assessment of technical cleanliness, which is performed, for example, under the following circumstances:

                                            Initial inspection and evaluation

                                            Inspection of incoming and outgoing components

                                            Quality control or monitoring of manufacturing processes relevant to cleanliness (e.g. cleaning, surface treatment and assembly processes).

                                            The guideline enhances the informative quality and comparability of test results; it also regulates the standardized expression of cleanliness specifications and cleanliness test results in the quality chain of the automotive industry.

                                            Information concerning references:

                                            If an inspection of technical cleanliness has been carried out in accordance with this guideline, the following reference is made in such documents as catalogues, specifications and reports:

                                            “Standard cleanliness inspection according to VDA 19.1” in cases where standard analysis methods and parameters are used and no other agreements regarding methods and parameters have been made within the scope of the customer-supplier relationship.

                                            “Extended cleanliness inspection according to VDA 19.1” in cases where more detailed analysis methods have been defined, implemented, parameterized and documented within the scope of the customer-supplier relationship, or in the event that modified or extended standard analysis methods are implemented, which have also been agreed upon and documented.

                                            “Shortened cleanliness inspection according to VDA 19.1” in cases where shortened analysis methods are implemented and whose application, parameterization and documentation are defined within the scope the customer-supplier relationship.


                                          国产成人AⅤ国语在线观看